Surfboard Fin Guide
Same board, new fins.
A whole different ride.
Fins are the cheapest upgrade you can make to a surfboard. This guide breaks down Futures and FCS fins by template shape, size, and construction, matches them to the waves you actually surf, and shows you the closest fin in the other brand if your board runs the other system. It also covers Firewire Endorfins and single fins for longboards and mid-lengths.
Shop Fins Find my fins ↓Which fins should I ride?
Tell us what boxes your board has, what you weigh, your fin setup, and the waves you surf most. We'll point you to a template, a size, and a construction, with the match in both Futures and FCS.
The finder is a starting point, not a rule. Board size, rocker, and how hard you surf all move the needle. The rest of this guide explains why each pick works, so you can fine-tune from there.
Four things that change how a fin rides
Every fin choice comes down to the same four decisions. Get them right and your board feels like it was shaped for you.
Fin anatomy in plain English
Every fin spec sheet uses the same handful of terms. Here's what each one does in the water.
| Term | What it is | More of it | Less of it |
|---|---|---|---|
| Base | Length of the fin where it meets the board | More drive and speed out of turns | Quicker, tighter turns |
| Depth | How far the fin reaches down from the board | More hold in steep, powerful waves | Looser, easier to slide the tail |
| Rake (sweep) | How far the tip sweeps back behind the base | Longer, smoother carving arcs | Snappier pivot turns in the pocket |
| Area | Total surface of the fin | Control and hold, especially for heavier surfers | Freer, skatier feel |
| Foil | The fin's cross-section. Side fins are often flat on the inside, center fins rounded on both sides | Flat inside foils feel direct and fast; curved inside foils add lift and a softer feel | |
| Flex | How much the tip bends under load | Springy speed and a lively feel | Control and predictability at speed |
Rake, neutral, or pivot
Both brands sort their thruster fins into the same three families. They just name them differently.
A more upright template with less sweep. It turns in a tight radius and releases fast, so you can snap off the top and stay in the pocket.
The balance point between drive and release. If you don't know what you like yet, ride a neutral fin first and adjust from there.
A long, swept-back template that holds through big carves and keeps driving down the line. It feels smooth and powerful in open-faced waves.
Thruster, quad, twin, or keel
Your board's boxes decide which setups you can run. A five-box board can go thruster or quad, so you get two boards in one.
| Setup | How it feels | Waves it loves | Shop |
|---|---|---|---|
| Thruster (3 fins) | Controlled, predictable, the all-round standard | Everything from waist high to overhead | Futures → FCS → |
| Quad (4 fins) | Fast and loose, drives hard down the line with no center fin slowing you | Fast, down-the-line waves and bigger, hollow surf | Futures → FCS → |
| Twin / twin +1 | Skatey and quick; the small +1 center adds control | Small, mushy, and summer waves, fish and mid-lengths | Futures → FCS → |
| Keel (2 fins) | Long base, low depth; holds a line and generates speed | Retro fish in small to medium, clean waves | Futures → FCS → |
| Single / 2+1 | Smooth, classic, trimmy | Longboards and mid-lengths, mellow point and beach breaks | Single fins → |
Fin constructions, explained
Two fins can share a template and ride completely differently because of what they're made of. Flexier builds give a springy, lively feel. Stiffer builds give control and drive at speed. Lighter surfers and smaller waves usually like more flex; heavier surfers and bigger waves usually want less.
Futures constructions
Futures rates its fins with a Ride Number from 1 to 10. High numbers are springy speed generators, the middle is balanced, and low numbers are solid and controlled.
| Construction | What it is | Feel | Try |
|---|---|---|---|
| Blackstix | Carbon build with a stiff base and a flexy tip | Most flex, springy, generates speed (Ride Number 7–10) | P6 Blackstix → |
| Honeycomb (Legacy) | Fiberglass over a light honeycomb core | Balanced, medium flex, the classic all-rounder (4–7) | F6 Honeycomb → |
| Alpha | Carbon-infused composite made in part from recycled fishing nets | Light and sensitive; flex varies by model | F6 Alpha 5-fin → |
| Techflex | Lightweight composite tuned for stiffness | Stiff but light, speed control (3–4) | JJF Techflex → |
| Fiberglass (Control Series, FG) | Solid, layered fiberglass | Stiffest and most predictable, a classic feel (1–4) | EA Fiberglass → |
FCS constructions
| Construction | What it is | Feel | Try |
|---|---|---|---|
| Neo Glass | Light molded fiberglass | Stiff and consistent; FCS's entry level for newer surfers | Neo Performer → |
| Performance Core (PC) | Layered fiberglass made by resin transfer molding | Feels like a glass fin; flex builds smoothly from base to tip. The intermediate sweet spot | Performer PC → |
| PC Carbon | Performance Core with carbon laid in | Stiffer base with a lively, responsive tip; quick, explosive turns | Carver PC Carbon → |
| AirCore | A foam core inside PC or PC Carbon fins | Lighter, with tightly controlled flex | FCS II fins → |
| Performance Glass (PG) | Solid, machine-cut fiberglass | Stiff and traditional; common on twins and keels | PG Power Twin +1 → |
| Soft Flex | Flexible urethane | Very soft and safe, made for softboards and learners | Comes on most softboards |
Fin size by surfer weight
Size your fins off your weight first, then nudge for waves and board. Futures puts the size in the model number (F4 is small, F6 medium, F8 large). FCS uses letters.
| Your weight | Futures size | FCS size |
|---|---|---|
| Under 105 lbs (under 48 kg) | XS / grom (F3, R3) | XS |
| 105–135 lbs (48–61 kg) | Small (F4, P4, R4) | XS or S (S above about 120 lbs) |
| 135–165 lbs (61–75 kg) | Medium (F6, P6, R6) | M (S if you're under about 140 lbs) |
| 165–190 lbs (75–86 kg) | Large (F8, P8, R8) | L |
| 190+ lbs (86+ kg) | Large (F8, P8, R8) | XL |
The right fin for your waves
Match the fin to the surf you ride most. Around Charleston that's usually small to medium beach break, which is why twins, quads, and flexier pivot fins live on so many boards here.
| Waves | What you need | Futures | FCS |
|---|---|---|---|
|
Small & mushy Knee to waist, weak, crumbly |
Speed from pumping and easy release. Pivot template, more flex, or a twin/quad | P-series Blackstix, Rasta Twin +1 | Reactor PC, Power Twin +1 |
|
Everyday beach break Waist to head high |
Balance of drive and release. Neutral template, medium flex | F-series Honeycomb | Performer PC |
|
Hollow & punchy Fast, steep, throwing |
Hold and control at speed. Neutral template with more area, stiffer build | JJF Techflex, Pyzel Honeycomb | Accelerator PC, Pyzel PC |
|
Bigger, open faces Points, reefs, overhead |
Drive and long carving arcs. Rake template, stiff build | R-series, AM2 Techflex | Carver PC, Carver PC Carbon |
Riding the other system? Find your match
Love a fin but your new board has the other brand's boxes? Use this chart to find the closest feel in the other system. These are our matches by template and flex, not exact copies, so expect small differences.
| If you like | Futures | FCS II |
|---|---|---|
| Upright, quick pivot turns | P4 / P6 / P8 | Reactor |
| Neutral all-rounder | F4 / F6 / F8 | Performer |
| Neutral with more area and control | JJF, Pyzel | Accelerator, Pyzel |
| Swept, drawn-out carves | R4 / R6 / R8, AM2 | Carver |
| Quad rears | Neutral Honeycomb quad rears | Performer quad rears |
| Twin +1 | Rasta, XO Coco, T. Patterson | Power Twin +1, MF Twin +1, MR Twin |
| Keel | Christenson, K2, Rasta Keel | Modern Keel, Performer Keel |
Matching the feel of the material
| Feel | Futures | FCS II |
|---|---|---|
| Springy, speed generating | Blackstix | PC Carbon |
| Balanced, smooth flex | Honeycomb | Performance Core (PC) |
| Light and premium | Alpha | PC with AirCore |
| Light and stiff | Techflex | Neo Glass |
| Solid glass, classic and stiff | Fiberglass (Control Series) | Performance Glass (PG) |
Firewire Endorfins: Kelly Slater's fins
Endorfins are Firewire's fins, designed by Kelly Slater. Carbon inlays add strength and flex, so the core can be about 90% air. They're light enough to float. Every set comes in two versions: single tab for Futures boxes and dual tab for FCS II, so check your boxes before you buy.
Kelly's upright template. It pivots tight and feels quick and responsive, and Firewire says it comes into its own in hollow waves and steep pockets.
Shop KS1 for FCS II →
The opposite of the KS1. A raked template built for hold and drive, so you get long, powerful turns and grip through critical sections.
Shop KSR 5-fin →
Kelly's twin fin template with two trailer fins, so you can ride it as a loose twin or add a trailer for more control.
Single fins for longboards and mid-lengths
A single fin goes in the long center box on most longboards and mid-lengths. It slides in, and a small screw and plate lock it wherever you set it. Where you put it, how big it is, and its shape change the ride as much as a new board would.
| Choice | What it does | Rule of thumb |
|---|---|---|
| Size | Bigger fins hold and trim; smaller fins turn easier | About 1 inch of fin per foot of board. A 9'0" likes a fin around 9" |
| Position | Forward in the box is looser and pivots easier. Back in the box adds hold and drive, and keeps the tail planted on the nose | Start in the middle, then move it an inch at a time |
| Classic or pivot template | Wide base and lots of area. Smooth, stable, and planted for trimming and noseriding | Traditional logs and glassy, mellow days |
| Performance or flex template | Less area, a thinner foil, and often a flexy tip. Faster and looser for turning | Lighter performance longboards and anyone who turns more than they noseride |
| 2+1 | A smaller center fin with two side fins for more grip on the rail | Run a smaller center fin, around 6 to 7 inches, with the sides in |
Single fins on our wall
| Fin | Ride | Best for |
|---|---|---|
| Allison Roberts Banana Clip 9.25" | Balanced classic template with smooth trim and steady hold | Traditional longboards and mid-lengths |
| Flying Diamonds CJ Parallax | Small area and a speed foil, so it's fast and loose | Turning on longboards; fun on mid-lengths too |
| Flying Diamonds TJ Signature Center | Speed and flow, with hold off the tail and on the nose | Performance longboards |
| Mid Fins Mahloe 7" | The Classic template, an easy all-rounder | Mid-lengths and shorter single fin boards |
Futures and FCS boxes are not interchangeable
The fin system is built into your board. A Futures fin won't go in an FCS box, and an FCS fin won't go in a Futures box. Check your boxes before you buy.
- One long, single slot per fin
- The fin has one long base that slides into the slot
- Locked in with a single grub screw and a fin key
- Endorfins and other brands sold as "single tab" fit Futures boxes
- Two short tabs per fin in a two-part plug
- Fins press in and lock with no screws or key
- Older original FCS plugs use small side screws; FCS II fins won't lock into those
- Endorfins and other brands sold as "dual tab" are built for FCS-style plugs
Common questions
Dial in your setup.
You've got the template, the size, and the flex. Grab the set that matches your board and your waves, and call us if you want a second opinion.
Shop Fins →