Home / Surfboard Fin Guide

Surfboard Fin Guide

The fin guide, Parrot Surf & Skate, Mount Pleasant, SC

Same board, new fins.
A whole different ride.

Fins are the cheapest upgrade you can make to a surfboard. This guide breaks down Futures and FCS fins by template shape, size, and construction, matches them to the waves you actually surf, and shows you the closest fin in the other brand if your board runs the other system. It also covers Firewire Endorfins and single fins for longboards and mid-lengths.

Shop Fins Find my fins ↓
Fin finder

Which fins should I ride?

Tell us what boxes your board has, what you weigh, your fin setup, and the waves you surf most. We'll point you to a template, a size, and a construction, with the match in both Futures and FCS.

1 · Your fin boxes
2 · Your weight
3 · Your setup
4 · Your waves
Recommended for
Shop all Futures fins →
Sizes come and go. If the size you need is sold out online, call the shop at 843-884-1035 and we'll check the wall or order it in.

The finder is a starting point, not a rule. Board size, rocker, and how hard you surf all move the needle. The rest of this guide explains why each pick works, so you can fine-tune from there.


Four things that change how a fin rides

Every fin choice comes down to the same four decisions. Get them right and your board feels like it was shaped for you.

Template (shape)
How swept back the fin is. More rake gives long, drawn-out turns. A more upright fin pivots and turns tighter.
Size
Matched to your weight. Bigger fins hold harder and drive more; smaller fins feel looser and release easier.
Construction (flex)
What the fin is made of decides how it flexes. Flexy fins spring you out of turns; stiff fins feel locked in and predictable.
Setup
Thruster, quad, twin, or keel. The number of fins and where they sit changes speed, drive, and how loose the board feels.

Fin anatomy in plain English

Every fin spec sheet uses the same handful of terms. Here's what each one does in the water.

Term What it is More of it Less of it
Base Length of the fin where it meets the board More drive and speed out of turns Quicker, tighter turns
Depth How far the fin reaches down from the board More hold in steep, powerful waves Looser, easier to slide the tail
Rake (sweep) How far the tip sweeps back behind the base Longer, smoother carving arcs Snappier pivot turns in the pocket
Area Total surface of the fin Control and hold, especially for heavier surfers Freer, skatier feel
Foil The fin's cross-section. Side fins are often flat on the inside, center fins rounded on both sides Flat inside foils feel direct and fast; curved inside foils add lift and a softer feel
Flex How much the tip bends under load Springy speed and a lively feel Control and predictability at speed
Toe and cant are set by your shaper when the boxes go in, so you can't change them with fins. Template, size, and flex are the parts you control.

Rake, neutral, or pivot

Both brands sort their thruster fins into the same three families. They just name them differently.

Upright
Pivot
Futures P-series · FCS Reactor

A more upright template with less sweep. It turns in a tight radius and releases fast, so you can snap off the top and stay in the pocket.

Best for: small to medium beach breaks, flatter-rocker boards, quick vertical surfing.
Shop Futures P6 →
Swept
Rake
Futures R-series & AM · FCS Carver

A long, swept-back template that holds through big carves and keeps driving down the line. It feels smooth and powerful in open-faced waves.

Best for: point breaks, reef, bigger open faces, higher-rocker boards, powerful surfers.
Shop FCS Carver →
Don't mix families. Keep all the fins in a setup from the same template family. A rake center fin with pivot side fins fights itself.

Thruster, quad, twin, or keel

Your board's boxes decide which setups you can run. A five-box board can go thruster or quad, so you get two boards in one.

Setup How it feels Waves it loves Shop
Thruster (3 fins) Controlled, predictable, the all-round standard Everything from waist high to overhead Futures → FCS →
Quad (4 fins) Fast and loose, drives hard down the line with no center fin slowing you Fast, down-the-line waves and bigger, hollow surf Futures → FCS →
Twin / twin +1 Skatey and quick; the small +1 center adds control Small, mushy, and summer waves, fish and mid-lengths Futures → FCS →
Keel (2 fins) Long base, low depth; holds a line and generates speed Retro fish in small to medium, clean waves Futures → FCS →
Single / 2+1 Smooth, classic, trimmy Longboards and mid-lengths, mellow point and beach breaks Single fins →

Fin constructions, explained

Two fins can share a template and ride completely differently because of what they're made of. Flexier builds give a springy, lively feel. Stiffer builds give control and drive at speed. Lighter surfers and smaller waves usually like more flex; heavier surfers and bigger waves usually want less.

Futures constructions

Futures rates its fins with a Ride Number from 1 to 10. High numbers are springy speed generators, the middle is balanced, and low numbers are solid and controlled.

Construction What it is Feel Try
Blackstix Carbon build with a stiff base and a flexy tip Most flex, springy, generates speed (Ride Number 7–10) P6 Blackstix →
Honeycomb (Legacy) Fiberglass over a light honeycomb core Balanced, medium flex, the classic all-rounder (4–7) F6 Honeycomb →
Alpha Carbon-infused composite made in part from recycled fishing nets Light and sensitive; flex varies by model F6 Alpha 5-fin →
Techflex Lightweight composite tuned for stiffness Stiff but light, speed control (3–4) JJF Techflex →
Fiberglass (Control Series, FG) Solid, layered fiberglass Stiffest and most predictable, a classic feel (1–4) EA Fiberglass →

FCS constructions

Construction What it is Feel Try
Neo Glass Light molded fiberglass Stiff and consistent; FCS's entry level for newer surfers Neo Performer →
Performance Core (PC) Layered fiberglass made by resin transfer molding Feels like a glass fin; flex builds smoothly from base to tip. The intermediate sweet spot Performer PC →
PC Carbon Performance Core with carbon laid in Stiffer base with a lively, responsive tip; quick, explosive turns Carver PC Carbon →
AirCore A foam core inside PC or PC Carbon fins Lighter, with tightly controlled flex FCS II fins →
Performance Glass (PG) Solid, machine-cut fiberglass Stiff and traditional; common on twins and keels PG Power Twin +1 →
Soft Flex Flexible urethane Very soft and safe, made for softboards and learners Comes on most softboards

Fin size by surfer weight

Size your fins off your weight first, then nudge for waves and board. Futures puts the size in the model number (F4 is small, F6 medium, F8 large). FCS uses letters.

Your weight Futures size FCS size
Under 105 lbs (under 48 kg) XS / grom (F3, R3) XS
105–135 lbs (48–61 kg) Small (F4, P4, R4) XS or S (S above about 120 lbs)
135–165 lbs (61–75 kg) Medium (F6, P6, R6) M (S if you're under about 140 lbs)
165–190 lbs (75–86 kg) Large (F8, P8, R8) L
190+ lbs (86+ kg) Large (F8, P8, R8) XL
Between sizes? Go smaller for a looser, skatier feel in small surf. Go bigger for more hold in powerful waves or on a longer board. Both brands' charts overlap, so either choice is a real option.

The right fin for your waves

Match the fin to the surf you ride most. Around Charleston that's usually small to medium beach break, which is why twins, quads, and flexier pivot fins live on so many boards here.

Waves What you need Futures FCS
Small & mushy
Knee to waist, weak, crumbly
Speed from pumping and easy release. Pivot template, more flex, or a twin/quad P-series Blackstix, Rasta Twin +1 Reactor PC, Power Twin +1
Everyday beach break
Waist to head high
Balance of drive and release. Neutral template, medium flex F-series Honeycomb Performer PC
Hollow & punchy
Fast, steep, throwing
Hold and control at speed. Neutral template with more area, stiffer build JJF Techflex, Pyzel Honeycomb Accelerator PC, Pyzel PC
Bigger, open faces
Points, reefs, overhead
Drive and long carving arcs. Rake template, stiff build R-series, AM2 Techflex Carver PC, Carver PC Carbon

Riding the other system? Find your match

Love a fin but your new board has the other brand's boxes? Use this chart to find the closest feel in the other system. These are our matches by template and flex, not exact copies, so expect small differences.

If you like Futures FCS II
Upright, quick pivot turns P4 / P6 / P8 Reactor
Neutral all-rounder F4 / F6 / F8 Performer
Neutral with more area and control JJF, Pyzel Accelerator, Pyzel
Swept, drawn-out carves R4 / R6 / R8, AM2 Carver
Quad rears Neutral Honeycomb quad rears Performer quad rears
Twin +1 Rasta, XO Coco, T. Patterson Power Twin +1, MF Twin +1, MR Twin
Keel Christenson, K2, Rasta Keel Modern Keel, Performer Keel

Matching the feel of the material

Feel Futures FCS II
Springy, speed generating Blackstix PC Carbon
Balanced, smooth flex Honeycomb Performance Core (PC)
Light and premium Alpha PC with AirCore
Light and stiff Techflex Neo Glass
Solid glass, classic and stiff Fiberglass (Control Series) Performance Glass (PG)
Size carries over too. Futures 4 ≈ FCS S, 6 ≈ M, 8 ≈ L. If you're over about 190 lbs, FCS makes an XL that Futures doesn't.

Firewire Endorfins: Kelly Slater's fins

Endorfins are Firewire's fins, designed by Kelly Slater. Carbon inlays add strength and flex, so the core can be about 90% air. They're light enough to float. Every set comes in two versions: single tab for Futures boxes and dual tab for FCS II, so check your boxes before you buy.

Upright
KS1
Pivot template · thruster or 5-fin

Kelly's upright template. It pivots tight and feels quick and responsive, and Firewire says it comes into its own in hollow waves and steep pockets.

Feels like: Futures P-series or FCS Reactor.
Shop KS1 for Futures →
Shop KS1 for FCS II →
Swept
KSR
Rake template · thruster or 5-fin

The opposite of the KS1. A raked template built for hold and drive, so you get long, powerful turns and grip through critical sections.

Feels like: Futures R-series or FCS Carver.
Shop KSR thruster →
Shop KSR 5-fin →
Twin
KS Twin +2
Twin template · two trailer options

Kelly's twin fin template with two trailer fins, so you can ride it as a loose twin or add a trailer for more control.

Feels like: a Futures or FCS twin +1.
Shop KS Twin +2 →
Sizing Endorfins: they come in S, M, and L. Use the FCS column in our size chart. Shop all Endorfins →

Single fins for longboards and mid-lengths

A single fin goes in the long center box on most longboards and mid-lengths. It slides in, and a small screw and plate lock it wherever you set it. Where you put it, how big it is, and its shape change the ride as much as a new board would.

Choice What it does Rule of thumb
Size Bigger fins hold and trim; smaller fins turn easier About 1 inch of fin per foot of board. A 9'0" likes a fin around 9"
Position Forward in the box is looser and pivots easier. Back in the box adds hold and drive, and keeps the tail planted on the nose Start in the middle, then move it an inch at a time
Classic or pivot template Wide base and lots of area. Smooth, stable, and planted for trimming and noseriding Traditional logs and glassy, mellow days
Performance or flex template Less area, a thinner foil, and often a flexy tip. Faster and looser for turning Lighter performance longboards and anyone who turns more than they noseride
2+1 A smaller center fin with two side fins for more grip on the rail Run a smaller center fin, around 6 to 7 inches, with the sides in

Single fins on our wall

Fin Ride Best for
Allison Roberts Banana Clip 9.25" Balanced classic template with smooth trim and steady hold Traditional longboards and mid-lengths
Flying Diamonds CJ Parallax Small area and a speed foil, so it's fast and loose Turning on longboards; fun on mid-lengths too
Flying Diamonds TJ Signature Center Speed and flow, with hold off the tail and on the nose Performance longboards
Mid Fins Mahloe 7" The Classic template, an easy all-rounder Mid-lengths and shorter single fin boards
Single fins sell fast. If the size you want is gone online, call 843-884-1035 and we'll check the wall or order it in.

Futures and FCS boxes are not interchangeable

The fin system is built into your board. A Futures fin won't go in an FCS box, and an FCS fin won't go in a Futures box. Check your boxes before you buy.

Futures
  • One long, single slot per fin
  • The fin has one long base that slides into the slot
  • Locked in with a single grub screw and a fin key
  • Endorfins and other brands sold as "single tab" fit Futures boxes
FCS II
  • Two short tabs per fin in a two-part plug
  • Fins press in and lock with no screws or key
  • Older original FCS plugs use small side screws; FCS II fins won't lock into those
  • Endorfins and other brands sold as "dual tab" are built for FCS-style plugs
Not sure what you have?
Look at the bottom of your board. One long slot per fin is Futures. Two small plugs per fin is FCS. Still stuck? Send us a photo or call 843-884-1035.
Bring the board by
Drop in at 811 Coleman Blvd in Mount Pleasant and test-fit fins on your board before you buy. Find us →
Longboards and mid-lengths
A center single-fin box takes a standard single fin with a screw and plate. Read the single fin guide ↑

Common questions

No. Futures fins have one long base that slides into a single slot, and FCS fins have two short tabs that sit in two-part plugs. A fin only fits the system it was made for, so check your board's boxes before you buy. If you love a fin and your board has the other system, use our Futures vs FCS chart to find the closest match.
Size your fins by body weight. Roughly: under 105 lbs is XS, 105 to 135 lbs is small (Futures 4), 135 to 165 lbs is medium (Futures 6, FCS M), 165 to 190 lbs is large (Futures 8, FCS L), and over 190 lbs is FCS XL or Futures large. Go a size smaller for a looser feel in small waves or a size bigger for more hold in powerful surf.
Original FCS plugs hold the fin with small side screws. FCS II plugs lock the fin in with no screws or key. FCS II fins won't lock into original FCS plugs, so check which plugs your board has. If they have small screw holes on the side, they're original FCS.
A rake fin is swept back. It gives long, drawn-out carves and drive on open faces. A pivot fin is more upright. It turns tighter and releases faster, which suits smaller beach breaks and pocket surfing. A neutral fin sits in between and is the best place to start.
In small, mushy waves you want speed and easy release. Try an upright pivot template with more flex, like the Futures P-series in Blackstix or the FCS Reactor, or switch to a twin +1 or quad if your board has the boxes. Those are our go-to setups for typical Charleston-area surf.
Yes. A flexier fin loads up in a turn and springs you out of it, which feels lively and helps in weaker waves. A stiffer fin feels locked in and predictable at speed, which helps in bigger or hollow waves. Lighter surfers usually like more flex, and heavier surfers usually like less.
If your board has five boxes, yes. Run three fins as a thruster or four as a quad. Many five-fin sets include both the thruster center fin and a pair of quad rears so you can switch by the day.
Yes. Keep every fin in a setup from the same template family and construction. Mixing a rake center fin with pivot side fins, for example, makes the board feel inconsistent.
Endorfins are Firewire's fins, designed by Kelly Slater, with a light carbon-reinforced core. Each set comes as single tab, which fits Futures boxes, or dual tab, which fits FCS II. Pick the version that matches your boxes. The KS1 is an upright pivot template and the KSR is a raked template.
A good starting point is about 1 inch of fin per foot of board, so a 9'0" longboard takes a fin around 9 inches. Go bigger for more hold and trim, smaller for easier turns. If you run it as a 2+1 with side fins, use a smaller center fin, around 6 to 7 inches.

Dial in your setup.

You've got the template, the size, and the flex. Grab the set that matches your board and your waves, and call us if you want a second opinion.

Shop Fins →
Surf builder Build your board with these fins Pick a board, add fins that fit its boxes and a tail pad, and see it all together before you buy. We set it up free in the shop.